Caravan, Trailer & Horse Float Rear View Dual Camera Kit
This Horse Float Rear View Camera Monitor System is supplied with 2 cameras, Trailer Hook Connector and 2 x 27m spiral for easy plug and play installation. One cable supplies power and video to each camera.
The 7" color LCD monitor connects directly to the ignition or accessories fuse which in turn powers both cameras. One end of the 15m cable (longer cables available by order) connects to the monitor and the other to the camera.
The VE- 727N0112-T1 is a high resolution 7" color LCD Mirror Monitor Backup kit with dual color IR cameras. The monitor is supplied with a pivoting dash or ceiling mount bracket and sun-visor although any monitor can fix to a windscreen suction cup bracket if preferred.
The cameras are weatherproof and fitted with a fixed wide angle lens with a 130 degree viewing angle. As soon as accessories or ignition is switched on, the cameras will be displayed to the monitor. The supplied cigarette lighter adapter is another option for powering the monitor and cameras rather than hard wiring to a fuse.
Users can switch between channels 1 and 2 or view both simultaneously. Alternately camera 1 or 2 can be connected to reverse gear and when that gear is selected, that camera will become the priority meaning it will display full screen.
By connecting a single camera to the reverse gear fuse, when reverse gear is selected that camera becomes priority. When forward gear is selected the secondary camera becomes priority and will display full screen. Otherwise both cameras can be displayed permanently at the same time.
This Rearview camera system is ideal any mobile application including Motorhomes, Trailers, Container Truck, Livestock Trailers, Horse Floats etc. Ideally an authorized auto electrician should fit the kit unless using the cigarette lighter adapter in which case anyone can install it.
The supplied cameras are made from a tough alloy construction with optional sun-shield as pictured.
7 “ Digital TFT LCD Color Monitor (Model VE- 727N)
7"Digital Screen TFT LCD Color Monitor with Removable Sun Visor
OSD MENU to Set Each Camera Trigger Priority
OSD MENU to Set Each Camera Reversing Image Delay Time 0-30s
OSD MENU to Set Each Camera Mirror/Normal image
Manual and Automatic Switch Display Mode
Color System: PAL/NTSC (AUTO)
Display Resolution: 2400RGB (H) X 480(V) dot
Support Two Camera Video Inputs: 1.0Vp-p75Ω
Wide view angle (CR: 10) :( up/ down): 45/65 (left/right): 65/65
Contrast ratio: 500:1
Back-light ：Single LED
Operating temperature: -20℃ to +70℃
Storage temperature: -30℃ to +80℃
Load Dump: DC14+67V (Td400mS) 5pulses
Free Operating Voltage: DC11-32V
External dimensions: (L x W x T) (180 x 118 x 38mm) without the Sun Visor
Weight Approx.: 379g
Weatherproof IR Color CCD Camera (MODEL: VE- 4103x2)
Image Type: 1/3 inch High Definition Color CCD
Horizontal Resolution: 420TV Lines
Effective pixel: NTSC: 510(H) ×492(V) PAL: 500(H) x582(V)
Usable Illumination: 0Lux (Built in 15pcs IR LED’s for Picture Support in the Dark)
Free viewing angle: 130°
Video Output: 1.0Vp-p75Ω
Automatic Heating Below +10oC (Options)
Power supply: DC12V (from Reversing Monitor)
Dimensions: 69(W) x 43(H) x 38(D) mm (without mounting)
U- Support Bracket,
Angle Adjustment Screw,
Removable Sun Visor,
Electrical Connecting Cable,
Auto cigarette lighter,