Wireless Gate Alert Extended Farm Security Alarm Two Zone Base Receiver

Wireless Gate Alert Extended Farm Security Alarm Two Zone Base Receiver

Wireless Gate Alert Battery Powered Wireless Gate Alarm Single Beamset

Wireless Gate Alert Battery Powered Wireless Gate Alarm Single Beamset

Wireless Gate Alert Pro Security Beam for Perimeter Fence Lines

Wireless Gate Alert Pro Security detects intruders crossing property perimeter fence lines • 1-4 zones Monitoring • Security Beam spans 200m of flat ground • Includes standard whip Antenna for 1000m additional connectivity range • Additional 1-3km Range with Yagi antenna • 3 Year Warranty, including batteries • Includes all mounting hardware, screws and swivel brackets
$1,280.00
In stock
SKU
PRO

Wireless Gate Alert Pro Security Beam for Perimeter Fence Lines

Wireless Gate Alert Pro is a more serious solution. This Gate Alert protecting your family and property because it allows you to monitor much greater areas (spans more than 200m) of flat ground with a detection security beam.  Now you can wirelessly monitor boundary fences or completely surround your home or implement sheds with powerful infra-red beams.

Wireless Gate Alert Pro is supplied with a 4 zone receiver as standard. Four Zone Base Receiver allows you to monitor up to 4 beam-sets to the one receiver. You can mix and match beam-sets from our shorter range kits if desired.

This model also offers far greater wave connectivity range because it utilizes high-gain external antennas – this allows connectivity ranges of up to 3000m.
When ordering, you have the option of upgrading from a standard external whip antenna to a long range Megabeam antenna. The two antenna options give maximum ranges of 1000m and 3000m respectively. These ranges are obstacle dependent. Range will be reduced significantly if there are a lot of trees, sheds and other things in the way.

Check our Wireless Gate Alert Standard if you require our best range gate alarm, or the Wireless Gate Alert Lite if you require a residential gate alarm.

Two-way Radio Supervision and On-board Diagnostics (displayed on Base Receiver) are features alarm installers routinely expect on wireless equipment – this unique feature we never seen in other gate alert yet.

Wireless Gate Alert Lite Driveway Alarm is compatible with our Pocket Beeper*, POCSAG Pager*, Text Message Module* and easily interfaces with Alarm Panels.

(* optional extras, sold separately).

BASE RECEIVER

The Four-zone Receiver supplied with Wireless Gate Alert Pro beam-sets, sounds an alarm whenever one of the beams is interrupted. The beeping sequence is different for each zone so the zone can be easily identified audibly. There is also a zone light that continues flashing after a while it was activated. The receiver has 4 different volume levels and each zone may be independently muted if required.

It also has four separate outputs that are mapped to each zone – this means other devices such as sirens or an alarm panel can interface with the receiver via a terminal block located on the rear of the enclosure. Maximum current for an output is around 300mA.

4 mute buttons that control the alert sound for each zone are also able to be individually control these 4 output. You can see at a glance which zones have their sound muted and which zones have their output de-activated.

Located next to the terminal block is a gold SMA aerial connector for an indoor antenna (supplied) or an outdoor Yagi antenna (optional) If many kilometers of range are required you can utilize Yagi antennas at both the beam-set and the base receiver ends of the installation.

The Four-zone Receiver is powered with a supplied 12V AC Adapter.

BEAM-SET

Each beam-set is made up of two beam Units, the ‘beam emitter’ and the ‘beam communicator’ and are installed directly facing each other up to 200m apart.  An infra-red beam is transmitted from one and received by the other.  Whenever the security beam is broken, the beam-communicator sends an RF signal to the Base Receiver, alerting to a possible intruder in the area.

The Wireless Gate Alert Pro Security beam system is designed to monitor a 200m stretch of open ground with its precise invisible infra-red beam.  There are three beam-strength settings inside the emitter unit.  For example, if you are only covering a 60m stretch of land you may want to select the lowest of the three settings particularly if the beam emitter is in shady spot where solar power is lower.

The Beam-set is powered by internal rechargeable batteries. The batteries are kept charged via small mountable solar panels. These batteries are relatively easily removed for replacement. There are no problem if the solar panels are not connected to maintain a daily charge, the batteries have around 8-10 days of storage capacity– in a real situation the solar panels would always be connected.

Beam alignment has been carried out without the aid of any special technology in test installations along straight fence lines, with minor fine tuning performed after the initial estimated positioning. However a small laser pointer is supplied for alignment assistance.  Regardless of what reference is used for the initial alignment, a ‘fine tuning’ procedure should always be carried out to ensure the two beam units are in fact correctly aligned. This will avoid needless false alarms.

SOLAR PANELS

Each Beam-set containing two solar panels, each measuring 125mm x 65mm.

The Beam-set batteries charged with these solar panels, even in year-round overcast conditions and even work in the United Kingdom.  Our solar panels have been treated specifically, to withstand salt spray and harsh UV rays which New Zealand experiences due to the depletion of the ozone layer.

ANTENNA OPTIONS

It would be more likely that longer radio connectivity would be required on a property so we decided an external antenna was in order for the Pro beam-set, therefore two options are available for each beam-set; a whip antenna or a Yagi antenna.

The whip antenna provides up to 1km of range while the Yagi provides up to 3km of range.  The whip antenna comes with a few meters of cable.  The Yagi comes with 12m of cable allowing it be mounted much further away from the beam communicator or indeed much higher.

Antennas connect to the ‘Beam-Communicator’ on its underside via a small gold SMA connector.  This fitting must be fitted with sealing product supplied to prevent corrosion damage.

The Yagi antenna is a UHF type very similar to common telemetry antennas that are seen nationwide on the likes of civil water tanks and weather stations, and therefore does not look out of place in a rural setting.

Specifications:

Base Receiver

  • Two-way Radio Supervision: YES
  • On-board Diagnostics: YES
  • Maximum Number of Supported Beam-Sets: 4
  • Volume Adjustment Increments: YES – Adjustable Volume (can also be muted)
  • Adjustable timed outputs: YES
  • Number of timed outputs: 4
  • Timed output range: 4 – 120 seconds
  • External Beeper output: YES
  • 3G Communicator Port: YES
  • Frequency: 458.550Mhz
  • Power Requirements: 12V DC
  • Dimensions – Millimetres: W75 | D119 | H30
  • Warranty: 3 Years

Pro Series Beam Set

  • Type of Beam: Active Photo-electric Infra-red
  • Maximum Beam Width: 200m
  • Maximum Radio connectivity with whip antenna installed: 1000m
  • Maximum Radio connectivity with YAGI antenna installed: 3000m
  • Sun Visors: YES
  • Diagnostic reports: YES
  • Diameter of IR beam: 55mm
  • Beam alignment method: Laser pointer / empirical
  • Modulation Type: Gaussian Frequency Shift Keying (GFSK)
  • Radio Frequency: 458.550 MHz Band (Country Specific)
  • RF Output Power: 80mW
  • Average Power Consumption per Beam Unit: 15mW
  • Battery Capacity: 1200mAh
  • Battery Voltage: 3.7V (charges to 4.2V approx.)
  • Weather Resistance: Poly-Carbonate, IP66 rated Enclosure, Fully water-proof, Ant-proof
  • Dimensions – Millimetres: W80 | D88 | H120
  • Warranty: 3 Years

Solar Panels

  • Voltage Output: 7.0Voc
  • Maximum Power output: 800mW
  • Adjustable mounting angle: YES
  • Standard Cable length: 50m
  • Cable length Customisation: YES (up to 50m)
  • Weatherproof: YES
  • Corrosion resistant: YES
  • Dimensions – Millimetres: W125 | D65
  • Warranty: 3 Years

Product Accessories

  • Wireless Gate Alert Security Beam set(s)
  • 3.7V Rechargeable Lipol Battery pack
  • 1 700-WGA Four-zone Base Receiver and antenna
  • 12V AC Adaptor
  • 1 Solar Panel for each Beam Unit
  • Mounting Brackets for Beam-sets and solar panels
  • 1 Whip antenna or MegaBeam Antenna (Choose which type depending on connectivity range)
Write Your Own Review
You're reviewing:Wireless Gate Alert Pro Security Beam for Perimeter Fence Lines