Base Receiver 4 Zone
This is our 4 zone slave base receiver as supplied with our standard 4 Zone Wireless Gate Alert Kit.
In some cases an additional base receiver may be needed. A slave base receiver (as pictured) can be interfaced with your existing driveway alert providing a dual receiving system. Perhaps one receiver in the house and another in a shed. The receiver underside depicts a "site code". To enabled a slave base receiver, we require the site code. A Clone base receiver is by order only.
4-Zone Base Receiver
The Wireless Driveway & Gate Alert Four-zone Base Receiver has additional on-board features. Whenever any enrolled beam-set beam is interrupted (1-4) the pictured indoor 12V powered base receiver sounds an audio adjustable audio alarm The alert sound differs depending on the activated Beam-set.
The Four-zone Base Receiver has 4 different selectable tones and volume levels. Other devices (even an alarm panel) can interface with the Base Receiver via a detachable terminal block located on the back of the enclosure. Located next to the terminal block is an aerial connector. For even longer range up to 2500m we do offer an optional external long range antenna or an optional Extra long Range (XR) kit.
The base receiver is supplied with relay inputs and output. In other words, an external siren, strobe light or any other 12V N/O N/C circuit device can be interfaced with the base receiver. If you have such a need, please contact us for more advice.
A 12V Power Adapter is supplied to power the Four-zone Receiver. When the beam set/s detects gate or fence motion, a transmission is sent to the receiver. The Base Receiver also receives diagnostic report messages from the installed Beam-set(s), including Low Battery and Beam Blocked alerts. Whenever the Base Receiver receives a communication of any kind from the Beam-Set(s), it responds with an acknowledgment or confirmation signal. Each separate Beam-set activates a different beeping sequence from the Base Receiver so it's easily identified.
If you already have a 4 zone kit but require one or more additional beam sets, see here.
Base Receiver
Maximum Number Of Supported Beam-Sets: 4
Two-way Radio Supervision: YES
On-board Diagnostics: YES
Volume Adjustment Increments: YES – Adjustable Volume (can also be muted)
Power Requirements: 12V DC
Dimensions – Millimetres: W75 | D119 | H30
Warranty: 3 Years
Accessories
1 x Four-zone Base Receiver
1 x 12V Power Adaptor for Base Receiver
| By Order | No |
|---|