Wireless Gate Alert Pro Series Additional Beam-set

Wireless Gate Alert Pro Series Additional Beam-set

700-WGA 2-Zone Base Receiver

700-WGA 2-Zone Base Receiver

700-WGA 4-Zone Base Receiver

• The 4-Zone Receiver receives alerts from any installed Beam-set, whenever a beam is broken and also receives diagnostic messages from the installed Beam-set(s), including Low Battery and Beam Blocked alerts. • The base receiver responds with an acknowledgment / confirmation signal, whenever the Base Receiver receives communication of any kind from the Beam-Set(s). • Each separate Beam-set activates a different alarming sequence from the Base Receiver so it is easily identified. • 3 Year Warranty
$345.00
In stock
SKU
BaseR

700-WGA 4-Zone Base Receiver

The Wireless Gate Alert 700-WGA the new Four-zone Base Receiver has additional on-board features, whenever any enrolled beam-set beam is interrupted, it sounds an alarm. The sound off of the alarm differs depending on the activated Beam-set.

The Four-zone Receiver has 4 different tonal control, and volume levels if required. Other devices (or an alarm panel) can interface with the Base Receiver via a detachable terminal block located on the back of the enclosure or via a GSM connector at the rear. Located next to the terminal block is an aerial connector for two supplied tuned aerials. Use the taller aerial for longer driveways.

A 12V Power Adapter is supplied to power the Four-zone Receiver.

Specifications

Base Receiver

  • Maximum Number Of Supported Beam-Sets: 4
  • Two-way Radio Supervision: YES
  • On-board Diagnostics: YES
  • Volume Adjustment Increments: YES – Adjustable Volume (can also be muted)
  • Power Requirements: 12V DC
  • Dimensions – Millimetres: W75 | D119 | H30
  • Warranty: 3 Years

Product Accessories

  • 1 700-WGA Four-zone Base Receiver
  • 1 12V Power Adaptor for Base Receiver

 

Write Your Own Review
You're reviewing:700-WGA 4-Zone Base Receiver