700-WGA 4-Zone Base Receiver

700-WGA 4-Zone Base Receiver

Wireless Gate Alert Pocket Beeper

Wireless Gate Alert Pocket Beeper

700-WGA 2-Zone Base Receiver

• 700-WGA 2-Zone Base Receiver can be added as a Slave Receiver to your system • Receive alerts in two zones at the same time. • Slave Base Receiver mimics all alerts and messages transmitted of the Master Receiver • 3 Year Warranty
$260.00
In stock
SKU
2-Zone

700-WGA 2-Zone Base Receiver

The Wireless Gate Alert 700-WGA Two-zone Receiver will sound an alarm if any enrolled beam-set beam is interrupted. The sound of the alarm is different, depending on which activated Beam-set is assigned to Zone 1 or Zone 2.

All other messages and alerts are also displayed on the Slave Receiver.

The Two-zone Receiver has around 95dBA/30cm of fixed volume level and smoke alarms are approx. 100dBA. Other devices (or an alarm panel) interface with the Base Receiver via terminal blocks located on the back of the enclosure. A Beam-set battery connector is Located next to these terminal blocks. In the event a battery from the Beam-set needs to be re-charged quickly, it can be plugged into this battery connector.

The Two-zone Receiver comes with an antenna and A 12V Power Adapter is supplied to power the Four-zone Receiver.

Specifications

Base Receiver

  • Maximum Number Of Supported Beam-Sets: 2
  • Two-way Radio Supervision: YES (via the Master Receiver)
  • On-board Diagnostics: YES (via the Master Receiver)
  • Volume Adjustment Increments: NONE – Fixed Volume
  • Dimensions – Millimetres: W65 | D100 | H30
  • Power Requirements: 12V DC
  • Warranty: 3 Years

Product Accessories

  • 1 - 700-WGA Two-zone Slave Receiver
  • 1 - 12V Power Adaptor for Base Receiver

Write Your Own Review
You're reviewing:700-WGA 2-Zone Base Receiver